Arthur Grillo DPC200 Instrukcja instalacji i obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler Arthur Grillo DPC200. Arthur Grillo DPC200 14 stron. Differential pressure controller, low pressure sensor with pi-control-mode
Również dla Arthur Grillo DPC200: Instrukcja instalacji i obsługi (16 strony), Podręcznik (7 strony)
Drukuj stronę
10. Specifications
Measuring medium:
Measuring principle:
Lowest span:
Highest span:
Overpressure protection:
Static pressure:
Pressure connections:
Enclosure:
Electrical connections:
Supply voltage:
Current consumption:
Output:
Alarm output:
Display:
Mode:
Controlling algorithm:
Setpoints:
Protection class:
Ambient temperature:
Storage temperature:
Weight:
Mounting:
Interference / emission:
Influences / limits:
Air or inert gases
Silicon diaphragm with spring and differential transformer
0...50 Pa
0...4000 Pa
0.2 bar
max. 0.2 bar
tubing 5 mm ø or 6 mm ø
UL 94 HB; Case polyamid, cover ABS
cable inlet M16x1.5, screw terminal
Electronic protection against reversed polarization
10...30 Vdc; 24 Vac (±15%)
approx. 10 mA @ 10 Vdc, approx. 12 mA @ 24 Vdc
0...10 V
Open Collector, max. 30 V / 30 mA
LCD-Display, 2 x16 characters
Measuring mode or controlling mode
PI
2 setpoints adjustable within software,
Setpoints are selectable with floating contact input
IP 54 according EN 60529
14...122 °F
-13...140 °F
approx. 250 g
vertical, position dependence by turning of 90°: approx. 25 Pa
according EN 61000-6-2, EN 61000-6-3, CE mark
Zero error:
Sum of linearity and hysteresis
(depends on measuring range):
Temperature drift, zero point:
Temperature drift, span:
Doc.-no.: DPC200_04_EBM_US
(I
= 0.4 mA @ 10 Vdc, I
max
Issue: 06/2018
SPECIFICATIONS
= 2 mA @ 20 Vdc)
max
± 0.75 %
± 0.5 % ... ± 1 %
± 0.3 % / 10 K
± 0.2 % / 10 K
13