dji mavic Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drony dji mavic. dji mavic 2 stron. Intelligent flight battery
Również dla dji mavic: Skrócona instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (14 strony), Faq (4 strony), Instrukcje bezpieczeństwa (20 strony), Podręcznik użytkownika (7 strony)

Drukuj stronę

1. Downloading the DJI GO 4 App and Watching Tutorial

3. Charging the Batteries

Videos

Use the provided charger to full charge the

Intelligent Flight Battery before first time use.

Search for 'DJI GO 4' in the App Store or Google

Play, or scan the QR code to download the app

on your mobile device.

Power Outlet

100 - 240V

DJI GO 4

Attach the Intelligent Flight Battery to the battery charger via the port as shown above.

Watch the tutorial videos at www.dji.com/mavic-air

Intelligent Flight Battery Charging time:

or in the DJI GO 4 App by tapping the icon in the

53 minutes in environments at temperatures between 15° to 40°C;

1 hour and 40 minutes in environments at temperatures between 5° to 15°C.

top right corner of your screen.

Remote Controller Charging time: 2.5 hours

Tutorial Videos

When fully charged, insert the Intelligent Flight Battery into the aircraft until you hear a click,

●

ensuring that the battery is mounted firmly in place.

The optional Battery Charging Hub can charge up to four batteries simultaneously. Please visit the

●

official DJI Online Store to learn more.

DJI GO 4 supports iOS 9.0 (or later) or Android 4.4 (or later).

Remove the remote controller cable before charging. Connect the provided communication cable

●

with the USB Adapter to the Charger.

2. Preparing the Aircraft

Check the Battery Levels and Power On/Off

●

Remove the gimbal

Unfold the front

Unfold the rear arms.

Unfolded

protector from the

arms and landing

camera.

gears.

It is recommended to mount the propeller guards when

Low

flying in Beginner Mode or indoors to ensure better safety.

Refer to the Mavic Air Propeller Guards User Guide to

learn more.

Press once to check the battery

It is recommended to have the gimbal protector attached when the aircraft is not in use. Make sure

level. Press once, then again and

●

the gimbal is horizontal when mounting or removing the gimbal protector.

hold to turn on/off.

Ensure the landing gear is properly unfolded before use. Otherwise, the built-in antenna may be

●

affected causing serious problems to the video link. Make sure you fold the landing gears first

before folding the aircraft arms.

4. Preparing the Remote Controller

Remove the Intelligent Flight Battery

from the aircraft.

Unfold the antennas and

mobile device clamps,

then attach the control sticks.

USB Adapter

USB-C Cable

Strong

Weak

Set the antennas parallel to each other

Ensure the control sticks are firmly mounted.

●

The remote controller cable with the Lightning Connector is mounted by default. Use the

●

appropriate cable for your mobile devide to connect to the remote controller.

When using an iPad or tablet, use the USB port on the remote controller.

●

Do not use the Micro USB and the USB ports simultaneously for linking video. Disconnect one port

●

from the video-linking device if the other port is in use.

5. Preparing for Takeoff

Power on the remote

Battery Level

High

Low

Battery Level

High

controller

Press the Power button once to

check the current battery level.

Press once, then again and hold to

turn on/off the remote controller.

Use your DJI account to activate the aircraft. Activation requires an internet connection.

Internet

6. Flight

Before taking off, make sure the Aircraft Status

Bar in the DJI GO 4 app displays 'Ready to Go'.

Auto Takeoff / Landing

●

Auto Takeoff

Place one end of the remote

Attach your mobile

controller cable to the end of

device within the

Manual Takeoff / Landing

the slot on the side of the

clamps.

●

remote controller.

Combination stick command

to start/stop the motors

Optimal Transmission Range

Left stick up (slowly)

to take off

The motors can only be stopped mid-flight when the flight controller detects critical error.

Remote Controller Operation

●

The default flight control is known as Mode 2. The left stick controls the aircraft's

altitude and heading, while the right stick controls its forward, backward, left and

right movements. The gimbal dial controls the camera's tilt.

Left Stick

DJI GO 4

App

Down

Power on the aircraft

Launch the DJI GO 4 App

Turn Left

Turn Right

Press the Flight Pause button for emergency braking during flight.

Controlling flight with Virtual Joysticks on your mobile device via Wi-Fi

●

Ready to Go (GPS)

DJI GO 4

App

Mavic_XXX

Auto Landing

1. Power on the aircraft.

2. Press and hold the Function Button on the aircraft for four seconds until you hear

a double beep, switching to Wi-Fi control mode.

3. Launch the DJI GO 4 app and tap the icon in the top right corner of your screen.

Next, scan the Wi-Fi QR Code on the aircraft to start the connection.

4. Tap Auto Takeoff.

5. Now you can fly the aircraft with touch control via Virtual Joysticks.

Left stick down (slowly) until you

touch the ground

Turn on your mobile device's Wi-Fi and enter the Wi-Fi password shown on the aircraft to connect to

●

the Mavic Air network if for any reason you cannot scan the QR code.

Hold a few seconds to stop the

When using Wi-Fi in a wide open area with no Electro-Magnetic Interference, transmission distance

motors

●

is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).

Linking is required when switching back to Remote Control mode. The Wi-Fi frequency of your

●

mobile device can be set to 2.4 GHz or 5 GHz. Set your Wi-Fi to 5 GHz for less interference. Once

connected to the Mavic Air, you can change your Wi-Fi password or reset your Wi-Fi connection.

(Refer to the User Manual for more information)

In the DJI GO 4 App

●

Right Stick

Forward

Normal

QuickShot

ActiveTrack

Backward

TapFly

Tripod

SmartCapture

Left

Right

Watch the tutorial in the DJI GO 4 app or on the Official DJI website to learn more.

●

Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the

●

Home Point, you should guide it with the control sticks.

8. Fly Safe

120m

Fly in Open

Strong GPS

Maintain Line

Fly Below 400 Feet

Areas

Signal

of Sight

(120 m)

Avoid flying over or near obstacles, crowds, high voltage power lines, trees

or bodies of water.

DO NOT fly near strong electromagnetic sources such as power lines and

base stations as it may affect the onboard compass.

≥

10 m/s

DO NOT use the aircraft in adverse weather conditions such as rain, snow,

fog and wind speeds exceeding 10 m/s or 22 mph.

No Fly Zone

Stay away from the rotating propellers

Learn more at:

and motors.

http://flysafe.dji.com/no-fly

It's important to understand basic flight guidelines, for the safety of both you and

those around you. Don't forget to read the Disclaimer and Safety Guidelines.

MAVIC is trademark of DJI.