dji Mini 2 Pytania - Strona 8

Przeglądaj online lub pobierz pdf Pytania dla Drony dji Mini 2. dji Mini 2 12 stron.
Również dla dji Mini 2: Quick Start Quide (8 strony), Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (7 strony)

What are the reasons for the DJI Mini 2 aircraft's height and distance limit?

a. In the beginner mode, the flight altitude is limited to 30 meters, and the flight distance

is limited to 30 meters.

b. The flight height and distance are set in the flight settings in DJI Fly.

c. When taking off in an environment with poor GPS signals (where the number of

satellites searched does not reach the minimum requirement for the aircraft to hover),

the flight altitude will be restricted.

d. If the pilot does not register the aircraft in China with their real name, the flight

altitude will be limited to 30 meters, and the flight distance will be limited to 50 meters.

e. When the aircraft is flying in a restricted flight z one, there will be flight restrictions.

For more information, please contact DJI Support.

What is the maximum flight time of DJI Mini 2?

31 minutes (measured while flying at 4.7 m/s in windless conditions).

What is the maximum flight altitude of DJI Mini 2?

The maximum flight altitude is 500 m, which may vary in different countries and regions

due to local laws. Before flying, please check local laws and regulations.

Do I have to remove the propellers for storage and transportation?

No. Please do not bend the propellers as it may affect the flight performance. We

recommend using the 360° Propeller Guard for protection when storing.

How often do DJI Mini 2 propellers need to be replaced? How can I change the

propellers of DJI Mini 2?

Before each flight, it is necessary to check the propellers for cracks, wear, warp,

corrosion, and loose screws. If any of these conditions are present, the propellers should

be replaced. Follow the instructions in the user manual to replace the propellers. Use the

included screwdriver to change the propellers. Please follow the instructions provided.

Remove the two blades and screws on the same arm, and replace with the propellers in

the same package with new screws. Attach the propellers with marks to the arms with

marks, and the unmarked propellers to unmarked arms. Ensure that the propellers and

arms are installed securely before each flight.