ARTHUR HOLM AH15D X2HDGA Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor ARTHUR HOLM AH15D X2HDGA. ARTHUR HOLM AH15D X2HDGA 14 stron. Hdcp compliant retractable monitors for furniture integration
Drukuj stronę
SYSTEM DESCRIPTION
Applications
The DynamicX2 system is a professional TFT display with an elegant
housing and an electrical lift system for installation into an horizontal
furniture surface.
On the starting position (retracted), the screen is placed inside the
table leaving the desk free of any obtrusive elements. When in this
position, the power will automatically be disconnected in order to save
energy and preserve panel life. By pressing the rear button located on
the table cover plate, the TFT panel raises up into the working position
(raised and tilted). The TFT power is then restored.
This TFT-LCD product range is specially designed for desk integration at:
∙ Conference rooms
∙ Meeting rooms
∙ Auditoriums
∙ Information desks
Features
• TFT Active Matrix display
AH15D X2HDGA
FULL HD 15.6"
AH17D X2HDGA
FULL HD 17.3"
AH19D X2HDGA
FULL HD 18.5"
AH22D X216GA
FULL HD 21.5"
• Retractable monitor with electrical engine for furniture integration and
tilting screen 20° (factory adjusted).
• Up/Down function operated by two buttons on the cover plate.
• Up/Down external contact close (GPI) or RS-422 control.
• Low power consumption.
• Low radiation.
• Quick response time.
• Data inputs DVI-I and DVI-D. HDCP compliant.
• Upper cover plate in brushed stainless steel. Monitor housing made of
solid mechanised aluminium in anodised finish and front glass.
8
∙ Board rooms
∙ Training rooms
SYSTEM DESCRIPTION
• Electrical powered lift system with variable speed.
• Addressable RS422 monitor control by AHnet protocol, RJ45
connector CAT5.
Box Contents
Before the installation of your retractable monitor, please check the
contents of the shipping box, it must contain the following items:
• Monitor
• Power cord
• Power supply 100-240Vac, 50-60Hz. Output 12V
• Remote control (1 per 5 monitors)
• User Manual
Important note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one.
Connections
Before connecting the power:
1. Open the hatch and remove the two foam protection pieces before
connecting the monitor.
2. Install the unit on a table or desk, in vertical position.
Power connection:
1. Plug the power cable from the power supply into an AC socket of
100-240 Vac, 50-60Hz.
2. Plug the 12Vdc cable into the socket on the unit.
Signal connection:
1. Use the DVI-I input to connect a DVI-D signal or an analog RGB
signal (VGA).
2. Plug the DVI-D connector to a DVI-D signal.
Caution! Never use this monitor in horizontal position.
9