ARTHUR HOLM AH22D X216GA Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor ARTHUR HOLM AH22D X216GA. ARTHUR HOLM AH22D X216GA 14 stron. Hdcp compliant retractable monitors for furniture integration
Drukuj stronę
OSD MENU
Setup
Language: OSD language selection
Restore Factory Default: Adjusts the parameters to the initial factory
parameters
Blending: OSD window transparency
∙ Low
∙ Medium
∙ High
∙ Off
OSD Duration: Adjusts the time that the OSD menu window remains on
screen
Software Update: Used for firmware upgrade mirror
Mirror:
0. Image with no flip
1. Vertical flip
2. Horizontal flip
3. Rotate
14
INPUT CONNECTORS
DVI 1/ DVI A DVI-I input signal:
Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to
connect an ARGB (analogue) input signal and select DVI-A on the OSD
monitor menu.
DVI 2 input signal:
Connect a DVI (digital) input signal and select DVI 2 on
the OSD monitor menu.
- Use high quality DVI cables with 2m maximum length.
12V D.C.:
Power supply input connector. XLR-4 connector.
- 1,2: Ground
- 3,4: 12Vdc
GPI:
Monitor external contact close control. SubD9 female.
1 . GPI1 +
2. GPI1 –
3. GPI2 +
4. GPI2 –
5. GPI3 –
6. GPI3 +
7. N.C.
8. +12Vdc (600mA max.)
9. Ground:
- Use GPI1 (1:12Vdc, 2:Ground) to open the monitor
- Use GPI3 (6:12Vdc, 5:Ground) to close the monitor
Termination:
Activate (ON) the termination, ONLY on the last unit of the
RS422 bus.
AHnet:
RJ45 CAT5 connector for addressable RS422 control. There is a loop
through connector to use as signal RS422 output. Up to 30 monitors can be
connected on the same RS422 bus.
Service:
Used for firmware upgrade.
15