dji AGRAS MG Series Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Quadcoptery dji AGRAS MG Series. dji AGRAS MG Series 17 stron. Spreading systems

Introduction

The MG Series Spreading System is compatible with Agras MG series aircraft and offers efficient,

reliable, and stable spreading operations. The material delivery system is precisely controlled by the

built-in stirring device and hopper gate, which can prevent material blockages and improve operating

accuracy and reliability.

Use the app compatible with your aircraft to set parameters such as the hopper outlet size and

spinner disk rotating speed. These parameters can be adjusted to meet different requirements. The

app provides warning prompts for an empty tank as well as for abnormalities in the rotating speed,

temperature, and hopper outlet size. These prompts help ensure system safety.

The Spreading System has two versions, 1.0 and 2.0. They each have a different structure for the

spinner disk. Compared with the Spreading System 1.0, the Spreading System 2.0 has a higher

material delivery rate and can spread materials 360° around the aircraft. Unless otherwise specified, the

descriptions in this document use the Spreading System 1.0 as an example.

In the Box

Spreading System × 1

Users have the option to purchase a fender with a screw pack to use with the Spreading System 2.0.

Overview

Spreader Lock Knob

Installation

A hex key for M3 screws is required for installation.

1. Mount landing gear leg extenders when using with an Agras MG-1S aircraft.

a. Remove the eight M3×6 screws in the lower section of the two landing gear legs and remove

the two landing skids.

b. Mount the four landing gear leg extenders to the original landing gear legs. Make sure to

align the screw holes before inserting and tightening the eight M3×6 screws.

Spare Spinner Disk × 2

Cable

Landing Gear Leg

Extender × 4

Spread Tank

Spreader

Spinner Disk

Screw Pack

M3 × 6