EDIFIER W830BT Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Słuchawki bezprzewodowe EDIFIER W830BT. EDIFIER W830BT 17 stron. Bluetooth stereo headphones

2. Connection

2.1. Bluetooth connection

Please complete the connection with your mobile before use. The steps are as below:

2.1.1. The distance between your mobile and the headphones should be kept within 1

m. The closer the better.

2.1.2. The headphones are powered on. Pressing multi-pad 3 seconds makes the

headphones into pairing status.

2.1.3. Enable your mobile's Bluetooth and search Bluetooth devices. Select 'EDIFIER

W830BT' to pair up and connect. After being connected successfully, the prompt

beep sounds and the headphones' blue light is flashing quickly.

Note:

1. In pairing status, the connection that cannot succeed in 3 minutes shall automatically

exit the pairing mode;

2. If your mobile prompts inputting the pairing password, please enter '0000';

3. After completing pairing, the headphones and your mobile shall remember each

other. When used next time, the headphones shall automatically connect the device

that was connected last time.

If your Bluetooth mobile supports Near Field Communication (NFC), please enable

NFC of your mobile at first and switch on the headphones, then touch the NFC area

of W830BT with the NFC area of your mobile. W830BT shall pair up with your

mobile.

Note:

● When your mobile hibernates or is screen-locked, your mobile cannot be paired up by

using NFC.

● When pairing up at the first time, it is required that your mobile is in touch

with W830BT for a longer time and can only be taken away until

W830BT is in pairing mode.

● When no device is connected, connection can be done by using NFC; if

a device is already connected, the connection can be terminated by using NFC.

The headphones can be connected simultaneously with two Bluetooth devices. The