3idee hp-z Instrukcja montażu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Adapter 3idee hp-z. 3idee hp-z 7 stron. Vesa adapter
Assembly Instruction
Step 1
Place your screen in a safe, soft place so that your screen does not get damaged.
Remove the base of your monitor if it is already attached. Simply use the click mechanism on the
monitor mount and pull the foot upwards.
Step 2
After you have removed the foot, the click mechanism must
be removed. To do this, loosen the two screws as shown and
pull the part away upwards.
(Figure 1)
Step 3
Now plug the 3idee VESA adapter onto the monitor as
shown.
Important! Note the correct orientation (top and bottom)
of the VESA adapter. The straight line on the VESA adapter,
which is located below the screw holes, should point towards
the bottom. (Figure 2)
Step 4
This is how the mounted VESA adapter should look on your
monitor. (Figure 3)
Assembly
instructions
6
Figure 1
Figure 2
Figure 3