ARTHUR HOLM DynamicCableRetract Instrukcja montażu - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Kable i złącza ARTHUR HOLM DynamicCableRetract. ARTHUR HOLM DynamicCableRetract 10 stron.
Drukuj stronę3- To level the device top surface of the
device with the table, screw the (x4)
M6x60 screws gradually.
There is a M6 screw in every corner, tighten one
more
than
others
DynamicCableRetract top surface with the top
surface of the table or Cover Plate.
Cover Plate assembling
you
can
level
the
Assembling with
Cover Plate
4- Tighten x4 M6 screws to block the device
Before blocking, The DynamicCableRetract top
surface must be centered in the hole
ensuring that the perimeter has the same
separation on all 4 sides.
8