dji PHANTOM 3 PROFESSIONAL Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Quadcoptery dji PHANTOM 3 PROFESSIONAL. dji PHANTOM 3 PROFESSIONAL 4 stron. Intelligent flight battery heater
Również dla dji PHANTOM 3 PROFESSIONAL: Skrócona instrukcja obsługi (10 strony), Skrócona instrukcja obsługi (8 strony), Podręcznik użytkownika (3 strony), Podręcznik zaawansowany (16 strony)

Remove the gimbal clamp as shown on the

right. Place your Phantom 3 Professional on a

flat surface, in an open space, with the nose

facing away from you. Then follow the steps

below in this order:

Your Phantom 3 Professional can automatically takeoff and land at the tap of a button in the Camera screen of the DJI

Pilot app.

Tap and slide to confirm automatic takeoff.

The aircraft will automatically takeoff and

hover at 5 feet (1.5 meters).

Toggle the Flight Mode Switch on your Remote Controller

to the right (P Mode). P Mode is Positioning Mode, A

Mode is ATTI Mode, and F Mode is Function Mode.

Turn on the Remote Controller by pressing the power

button once, releasing it, and then pressing and holding

for 2 seconds.

Insert the Intelligent Flight Battery into your Phantom 3

Professional. Turn on the battery by pressing the power

button once, releasing it, and then pressing and holding

for 2 seconds.

Ensure the LED on your Remote Controller is green,

indicating it is ready to be used.

Connect your mobile device to the Remote Controller

with a USB cable and launch the DJI Pilot app. Follow the

instructions within the app.

In the app, tap 'Camera'. Ensure your Phantom 3

Professional is ready to fly by completing the on-screen

Checklist. Beginner Mode is enabled by default when

you launch the DJI Pilot app for the first time. The

aircraft's altitude and flight distance are restricted when

flying in Beginner Mode. You can disable Beginner

Mode in the Settings Page of the DJI Pilot app.

Calibrate the compass by tapping the Aircraft Status

Bar in the app and selecting 'Calibrate'. Then follow the

on-screen instructions.

Attach the propellers with a black nut onto the motors

with a black axis and spin them counter-clockwise to

secure. Attach the propellers with a gray nut onto the

motors with a gray axis and spin them clockwise to secure.

Before taking off, make sure the Aircraft Status Bar in the DJI Pilot app

indicates 'Safe to Fly (GPS)' or 'Safe to fly (non-GPS)' if flying indoors.

Tap and slide to confirm automatic landing.

The aircraft will automatically land.