3idee ox-mag Instrukcja montażu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Adapter 3idee ox-mag. 3idee ox-mag 7 stron. Vesa adapter
Również dla 3idee ox-mag: Instrukcja montażu (6 strony)

Assembly Instruction

Step 1
Place your MSI monitor on a safe, soft surface to avoid
damaging it during installation.
Take the M4x20 screws (screw bag SP14) and attach the
VESA adapter to the back of your monitor using a
screwdriver. (Figure 1)
First loosely screw in all 4 screws and then gradually tighten
them.
Step 2
This is how the correctly mounted VESA adapter should look
on your monitor. Please check again if all screws are
tightened properly. (Figure 2)
Step 3
For this step we recommend a 2nd person.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2).
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION: Pay attention to the right screws!
(Figure 3)
Assembly
instructions
6
Figure 1
Figure 2
Figure 3