FITNESS AUDIO DX6-TF Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System mikrofonowy FITNESS AUDIO DX6-TF. FITNESS AUDIO DX6-TF 16 stron. Dual-channel three redundancy digital wireless microphone system

Drukuj stronę

Antenna installation

Install supplied 2.4GHz receiver SMA antenna A and B at SMA connectors on the front panel.

Please make sure the antennas being firmly tightened otherwise the reception quality might be

affected.

Receiver placement

1. The receiver should be at least 1m above the ground and

1m away from a wall or metal surface to minimize

reflections.

2. The transmitter should also be at least 1m away from a

wall or metal surface to minimize reflections.

3. The transmitter should also be at least 1m away from the

receiver. Keep antennas away from noise source such as

motors, automobiles, neon light as well as large metal

objects.

4. The receiver should be at least 5m away from 2.4GHz wifi

or other 2.4GHz transmitting devices.

5. Power voltage should not below 12V DC or above 15V DC. Deficient current causes unstable

operating voltage or malfunction and over current shortens the product life and possibly

damages circuits.

Rack mounting

The receiver can be cabinet-mounted by either one or two units. If only one receiver is to be

mounted, an optional kit is available and it's installed as shown in Fig 1. If two receivers are to

be mounted, they can be assembled by another kit and installed as shown in Fig 2.

▌

Rack mounting one receiver

▌

Rack mounting two receivers



Fig 1

Fig 2

Instructions