AIMS Power LFP12V200A Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akumulator AIMS Power LFP12V200A. AIMS Power LFP12V200A 13 stron. 50ah | 100ah | 200ah

CHARGING

Only use battery chargers made for

LiFePO

4 batteries. See battery specifications. Fire may occur if the correct

battery charger is not used.

Ensure the battery cables are tight, secure and have a good connection.

Follow instructions on battery charger.

Use Smart Battery Charger rated for

LiFePO

Battery should be inspected often.

Ensure cables and terminals are kept clean and free from corrosion, dirt or build-up of any kind. Use dry cloth to

clean.

When possible keep batteries at a moderate temperature.

Dispose of batteries properly. Must be recycled.

Store battery at 50% SOC.

Charge and discharge according to battery specifications.

Do not reverse the polarity! The battery has safety protections, but damage may occur, and warranty

voided.

Check battery voltage before use. Make sure the battery voltage matches that of the battery charger and load.

Properly size your battery cables for your application.

Battery cables must be crimped or preferably, soldered and crimped. Soldered connections alone are not

acceptable. High quality, UL-listed battery cables are recommended.

Battery terminal must be clean to reduce the resistance between the DC terminal and cable connection.

Do not connect the positive terminal and negative terminal of the battery to each other with any metal object (such

as wire).

Install in an environment with minimal heat. Warranty voided for terminal burnout due to excess heat and improper

maintenance.

Install in any orientation.

Battery terminal torque – 7.7 – 7.7 Nm

Use proper fusing.

The terminal lugs are in a separate bag within the box.