dji OK100 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer dji OK100. dji OK100 18 stron.

Zoom Slider

Move the slider to the T position to enlarge the subject and move the slider to

the W position to shrink. Push the slider once to change the zoom once. Push

the slider continuously to change the zoom continuously.

Trigger

Press and hold to enter lock mode. In lock mode, the gimbal will not follow the

handle movements. Release to exit lock mode.

Press once to start or stop ActiveTrack 3.0.

Press twice to recenter the gimbal. When using ActiveTrack 3.0, the gimbal

will recenter to the center of the camera view.

Press three times to switch between front and back cameras.

Press once, and then press and hold to enter Sport mode. Release to exit. In Sport

mode, the follow speed of the gimbal increases for capturing quick movements.

Charging Port (USB-C)

Charge DJI OM 4 by connecting a USB adapter to this port.

USB-A Port

The USB-A port can be used to charge mobile phones.

1/4"-20 UNC Port

The 1/4"-20 UNC port can be used to attach a tripod.

M3×0.5 Screw Hole

Used to mount counterweights. Counterweights should be used if a camera

lens or microphone is mounted on the mobile phone. Make sure the total

weight of these accessories is less than 290 g.

Lanyard Hole

The lanyard hole can be used to attach a wrist strap.

Combination Operation

The Bluetooth connection can be reset if DJI OM 4 cannot be connected or found. Press the

M button, shutter button, and trigger simultaneously to reset the Bluetooth connection. The

Bluetooth connection is reset successfully when the system status indicator turns from green

to yellow. Search DJI OM 4 and reconnect.

DJI OM 4 will be powered off automatically if there is no operation for 10 minutes in

standby mode.

DJI OM 4 User Manual