dji Aeroscope Mobile Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do dronów i quadkopterów dji Aeroscope Mobile. dji Aeroscope Mobile 15 stron. Stationary unit installation
Również dla dji Aeroscope Mobile: Podręcznik użytkownika (7 strony)
Drukuj stronę
- 1. Table of Contents
- 2. EN Disclaimer and Warning
- 2. Overview
- 2. Indicators
- 2. Rx1: Type 1 Receiver Status Indicator
- 2. Rx2: Type 2 Receiver Status Indicator
- 2. Rx3: Type 3 Receiver Status Indicator
- 2. Drone: UAV Information Capture Indicator
- 3. Product Profile
- 3. Introduction
- 3. In the Box
- 4. Electromagnetic Compatibility
- 5. Usage
- 6. Specifications
- 7. Compliance Information
Rx1: Type 1 receiver status indicator
Indicator
Solid green
Solid red
Rx2: Type 2 receiver status indicator
Indicator
Solid green
Solid red
Rx3: Type 3 receiver status indicator
Indicator
Solid green
Solid red
Drone: UAV information capture indicator
Indicator
Green blinking
Off
** The UAV number is the reported number from the background. The same UAV serial number
in a short time is regarded as one.
Link: Monitor connection status indicator
This is used to indicate the connection status between the processor and monitor.
Indicator
Solid green
Solid red
MB: Processor module status indicator
This is used to indicate the processor's working status.
Indicator
Green blinking
Yellow blinking
Red blinking
Solid on/off
4
Description
Functioning normally.
Functioning abnormally.
Description
Functioning normally.
Functioning abnormally.
Description
Functioning normally.
Functioning abnormally.
Description
UAV detected, green LED blinking indicates UAV information
reception.**
No UAV information received.
Description
Connected normally and communicating with the monitor.
Disconnected from the monitor.
Description
Functioning normally or firmware updated successfully.
Checking consistency when powered on or updating firmware.
Firmware update failed.
Functioning abnormally.