dji Dropsafe Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do dronów i quadkopterów dji Dropsafe. dji Dropsafe 14 stron.

DJI DROPSAFE User Manual

4. It is recommended to test the system before each deployment. Follow the steps below to complete the

test:

(1) Ensure triggering pin is locked in place and system is connected with flight controller. Unscrew the

trigger compression tool for one round (do not unscrew for more than one round, otherwise triggering

pin might be damaged when it is released). Make sure that system LED blinks solid green.

(2) Toggle and hold the "safety switch" on the remote controller to the ON position. Then toggle the

"activation switch" to activate and deploy the system. If the system is deployed successfully, the system

LED blinks solid green and red, otherwise it indicates there is connection error, examine the connection

to re-run the test until the issue is solved.

(3) Power off the flight controller to complete the test. Repeat step 1 to step 3 described in "Setting Up the

System Base for Deployment" to reset the system base.

5. Now the triggering pin is in the ready position. Rotate the hex screwdriver counter-clockwise to remove the

trigger compression tool from the triggering housing unit.

6. Screw the manifold into the system base (as shown in the figure A below).

7. Ensure the manifold is aligned with the marker on the system base (as shown in the figure B below).