dji HG8001606 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do dronów i quadkopterów dji HG8001606. dji HG8001606 7 stron. Focus expansion module

Drukuj stronę
dji HG8001606 Podręcznik użytkownika
Linking
The DJI Focus Expansion Module must be linked to the master remote controller of the Matrice
600 or Inspire 1 Pro/RAW in order to work.
How to Link
1. Power on the remote controller for the Matrice 600 or Inspire 1 Pro/RAW, and press the C1,
C2 and video recording buttons simultaneously. Release the three buttons when you hear a
beeping pattern consisting of 1 long beep followed by 2 short beeps, and then press the shutter
button once. The remote controller is ready to link when it starts to beep rapidly.
2. Power on the DJI Focus Expansion Module, then (a) press the link button once, or (b) on the
DJI Focus Remote Controller, go to Menu > Setting > Connect RC > Connect to begin linking.
3. The linking process is successful when the status indicator turns solid yellow or solid green.

Status LED Description

Status LED
Solid red
Blinks red
Solid yellow
Solid green

Specifications

Operating
Frequency
Transmission
Distance
Transmitter
Power
(EIRP)
Operating
Temperature Range
Operating Voltage
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
5.725-5.825 GHz
50 m（the distance between the Expansion Module and the Master
Remote Controller of the Matrice 600 or Inspire 1 Pro/RAW,
unobstructed, free of interference）
13 dBm
-20 to 55℃
Description
Loader Mode
The device is not linked.
The device is linked but not connected to the
motor or camera.
Successfully linked and working normally