Fitness Reality 2804.1-022316 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt fitness Fitness Reality 2804.1-022316. Fitness Reality 2804.1-022316 16 stron. Bench

Installing the Front Stabilizer (C) with Stability End Caps (134):

1. Lift up the Front Support Tube (B), and then align the Front Stabilizer (C) holes with the

holes on the front curve of the Front Support Tube (B). The square holes of the Front

Stabilizer (C) should point towards the floor.

2. Insert Two Carriage Bolts (29) into the square shaped holes of the Front Stabilizer (C)

until the threads reach all the way through to the other side and come out of the front

curve of the Front Support Tube (B).

3. Attach two Curved Washers (63), two Spring Washers (61), and two Cap Nuts (79) to the

threaded side of the two Carriage Bolts (29).

Tighten the Cap Nuts (79) with the 14 mm Multi Hex tool provided.

Installing the Rear Stabilizer (D) with Wheel End Cap (133):

1. Lift up the Rear of Main Frame (A), and then align the Rear Stabilizer (D) holes with the

holes on the rear curve of the Main Frame (A). The square holes of the Rear Stabilizer (D)

should point towards the floor and The CUSTOMER SERVICE stickers facing upward.

2. Insert Two Carriage Bolts (29) into the square shaped holes of the Rear Stabilizer (D) until

the threads reach all the way through to the other side and come out of the rear curve of

the Main Frame (A).

3. Attach two Curved Washers (63), two Spring Washers (61), and two Cap Nuts (79) to the

threaded side of the two Carriage Bolts (29).

Tighten the Cap Nuts (79) with the 14 mm Multi Hex tool provided.

Hardware:

(#29) Carriage Bolt

4 PCS

STEP 2

(#79) Cap Nuts

4 PCS

(#61) Spring Washer

4 PCS

Multi Hex tool with

Philips screw drivers

(#63) Curved

Washer

4 PCS