Artila Matrix-310 Instrukcja obsługi sprzętu - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Gateway Artila Matrix-310. Artila Matrix-310 17 stron. Programmable industrial iot gateway
Drukuj stronę
3.3 Ethernet LAN Port
There is a 10/100Mbps Ethernet by RJ45 connectors.
It is designed via SPI interface (Mode 0 & mode 3) connected to MCU (ESP32)
The Ethernet Port use RJ45 connector. Pin-Assignment as below:
PIN
Signal
1
ETx +
2
ETx -
3
ERx +
6
ERx -
3.4 Console Port
There is one Console port by micro-USB connector.
A Micro-USB port is used for power supply (+5VDC) to the board (only basic
operation and flashing) and for
the communication with the chip via the on-board USB-to-UART bridge.
ARTILA
flashing
applications to the MCU (ESP32) as well as
Matrix-310 Hardware Guide
12