Artila RIO-2015PG Instrukcja obsługi sprzętu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Systemy wejścia/wyjścia Artila RIO-2015PG. Artila RIO-2015PG 12 stron. Freertos programmable remote i/o module
Drukuj stronę3. Pin Assignment and Definition
3.1
Power In: (CN1: P1~P3)
Vin (P1): DC power + in
Gnd (P2): power ground
(P3): Chassis ground
Connecting 9~48VDC power to Vin and Gnd. If the power is properly supplied, the Power LED will
keep solid green color and a beep will be heard. The chassis ground is to connected to chassis or
earth ground if needed.
3.2
Relay Output (CN1: P4~P9)
DO1_NC (P4): Relay one normal close
DO1_COM (P5): Relay one common
DO1_NO (P6): Relay one normal open
DO2_NC (P7): Relay two normal close
DO2_COM (P8): Relay two common
DO2_NO (P9): Relay two normal open
3.3
Isolated Digital Input (CN1: P10~P14)
DI1 (P10): Digital input 1
DI2 (P11): Digital input 2
DI3 (P12): Digital input 3
DI4 (P13): Digital input 4
DI_COM (P14): Common pin of DI1~DI4
3.4
Isolated RS-485 (CN1: P15~P16)
D+ (P15): Data+
D- (P16): Data-
DI1~4
DI_COM
5
RIO-2015PG Hardware Guide