Artillian 3pt Quick Hitch Adapter Instrukcje instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Adapter Artillian 3pt Quick Hitch Adapter. Artillian 3pt Quick Hitch Adapter 2 stron. For the artillian jdqa & jdpo pallet fork frames

Drukuj stronę

6. The adapter is now installed. To attach your Quick Hitch to the adapter, one suggested method is

to stand it up on the ground, lower the loader close to the same height and approach the Quick

Hitch from behind with the tractor. Then, just tip the Quick Hitch as needed to get the top pin

through the mounting holes. Then, lift the loader up to waist height and finish installing the two

lower attaching pins.

7. Attaching your 3pt implements to the Quick Hitch is nearly the same as attaching them on the rear

of your tractor. The exception is that the dump/curl circuit of your loader allows you to tip the

Quick Hitch to get the best angle for hooking the top pin.

8. Remember to lower the locking levers on your Quick Hitch after your implement is attached!

All safety guidelines illustrated in your tractor and loader owner's manuals should be observed

whenever using Artillian attachments. Thank you and be safe!

Be especially cautious when back dragging with any implement. Debris can be thrown

directly at you. Proper protection should be worn and care should be taken to move slowly

and at a safe working angle to minimize this danger. FAILURE TO OBSERVE THIS COULD

KILL YOU!

Fig 2