djpower FLAME MACHINE HF-210 Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt dla DJ-ów djpower FLAME MACHINE HF-210. djpower FLAME MACHINE HF-210 16 stron.

Drukuj stronę

（CH2）：Speed

CH2: Speed Setup

DMX Value

Speed

Max Speed

The second channel defines the rotating speed. It work together with Channel 1 for manual firing

（CH3）： Ignition

CH3: Ignition

DMX Value

Firing

The third channel activates the actual ignition. If the DMX value of this channel higher than 253, the Wave flame machine will ignite.

（CH4）： Opening time

CH4: Manual Firing Duration setup

DMX Value

Firing

Permanent

Duration

The fourth channel is the firing duration setup. Below formula can be used to calculate the firing duration (ms): DMX Value = t/10

（CH5）: Channel 5 (CH5): Program Sequence

The fifth Channel allows to firing a preset sequence. Three DMX values can be used for one of the programmed firing sequence from above

sequence list (refer to above sequence list table). Below formula can be used to calculate firing sequence:

Sequence No.= DMX Channel Value÷3

CH5: Sequence List

DMX Value

0~2

Sequence No.

N/A

Note:Channel 5 overrides Channel 1, 2, 3, and 4 in case the value is from 3~255.

(CH6): Channel 6 Mode

The sixth channel is the working mode of pump

When the safety lock located at TEST MODE, set DMX value between 50-200 to test the system. For safety, the device will not Pressurize.

When the safety lock located at USER MODE, the device Pressurize activated by set DMX value between 50-200. The device can only make

ignitions in Firing mode.

0-253

Wave flame machine won't ignite

10ms

20ms

3~5

6~7

0°

15°

30°

45°

60°

75°

90°

105°

1-254

Incremental of Speed

30ms

8~10

11~12

- 13 -

Max Speed

254-255

Wave flame machine ignites

254

............

2540ms

..........

115

128

140

159

177

195

213

249

255

Permanent

255