djpower LED Flame Light F-6 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt dla DJ-ów djpower LED Flame Light F-6. djpower LED Flame Light F-6 8 stron.

1. Safety instructions

•

This device is suitable for indoor use (not outdoors) only.

•

All modifications to the device will void the warranty.

•

Repairs are to carry out by skilled personnel only.

•

Use only fuses of the same type and original parts as spare parts.

•

Protect the unit from rain and humidity to avoid fire and electric shocks.

•

Make sure to unplug the power supply before opening the housing.

Be careful with heat and extreme temperature

Avoid exposing it to direct rays of the sun or near a heating appliance.

Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.

Keep away from humidity, water and dust

Do not place the set in a location with high humidity or lots of dust.

Containers with water should not be placed on the set.

Keep away from sources of hum and noise

Such as transformer motor, tuner, TV set and amplifier.

To avoid placing on un-stable location

Select a level and stable location to avoid vibration.

Do not use chemicals or volatile liquids for cleaning

Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.

If out of work, contact sales agency immediately

Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,

do not open the cabinet by yourself, it might result a danger of electric shock.

Take care with the power cable

Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.

When not using the device for an extended period of time, be sure to disconnect the plug

from the receptacle

3 / 8