djpower WP-2 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt dla DJ-ów djpower WP-2. djpower WP-2 17 stron. Bubble fogger

WP-2 Bubble Fog Machine

Never drink the fog fluid. If it did happen, contact a doctor immediately. If the

fluid comes into contact with the eyes and mucous membranes, rinse the

areas immediately with water.

Only operate the device in a horizontal position.

Never use solvents or aggressive cleaning agents to clean the device.

Instead, use a soft, slightly damp cloth.

When transporting the device, please use the original packaging or the

accessories provided to prevent transport damage.

Unauthorized changes to the device are prohibited for safety reasons!

1.2.

Any use of the device that deviates from the use described in these

operating instructions can lead to damage to the device. In this case,

the warranty claim expires. In addition, it should be noted that any

other use is associated with dangers and can lead to short circuits, fire,

electric shock and falls, for example.

Overhead mounting

Risk of death!

During installation, the provisions of BGV C1 (formerly VBG 70)

and EN 60598-2-17 must be observed! The installation is to be

carried out exclusively by authorized specialist personnel.

The suspension devices of the device must be constructed and dimensioned

in such a way that they can carry ten times the payload for one hour without

causing permanent damaging deformation.

The installation must always be carried out with the help of a second,

independent suspension. This can, for example, be a suitable safety net. The

secondary suspension must be designed and installed in such a way that in

the event of a failure of the main suspension, no part of the installation can

fall.

During assembly, conversion and dismantling, staying unnecessarily in the

area of movement areas, on lighting bridges, under high workplaces or in

other hazardous areas is prohibited.

The commercial user has the following responsibilities for safety-related and

mechanical equipment:

• Check by an expert before the first start-up or after decisive changes

before the start-up again.

4 / 16