djpower XUN V-5 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt dla DJ-ów djpower XUN V-5. djpower XUN V-5 17 stron.
Drukuj stronęV-5 USER MANUAL
1.5
Safety Notes
Please read the following Safety Notes carefully before working with the product. The notes include important safety
information about installation, usage, and maintenance.
1.5.1
Personal Safety
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Do not touch the casing of the machine during operation as it may be very hot.
•
The machine spout is very hot during operation, do not touch it.
•
The minimum safe distance between people and flammable objects is 3 meters from the machine. The flash spark
can only be in the air, can't touch anything, and keep an eye out for spray residue that may fall.
Keep children away from the machine! Minors are prohibited from using and operating the machine.
•
•
Protect your eyes when working near the machine.
1.5.2
Mounting and Rigging
•
For safety reasons, we do not recommend other installation methods, please install and operate the machine in a flat
position.
•
When transferring product from extreme temperature environments, (e.g. cold truck to arm humid ballroom)
condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power. Please make sure that there are no
flammable materials around the product during operation.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic, etc.)
•
Do not use in a confined space. Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces. Be sure that no ventilation slots on the product's housing are blocked.
1.5.3
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated
on the decal or rear panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Never connect this product to a dimmer pack or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it
1.5.4
Operation
•
Do not operate this product if you see damage to the housing or cables. Have the damaged parts replaced by an
authorized technician at once.
•
Make sure there are no flammable materials close to this product while it is operating.
•
Do not cover or plug the output nozzle during operation.
•
Do not use the product as a space heater.
•
Never carry the product by the power cord or any moving part. Always use the handles.
•
Empty the storage bin before transporting the product.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
2