Custom Dynamics CD-FORK-BCM-SC Instrukcje instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Akcesoria motocyklowe Custom Dynamics CD-FORK-BCM-SC. Custom Dynamics CD-FORK-BCM-SC 5 stron. Dynamic led fork reflectors
Drukuj stronę
6
7 7
2 Pin Connector Plug
Plug Tab:
Push In
Questions? Call us at: 1 (800) 382-1388
Installation Instructions - Page 3.
Installation:
19. Route the wiring harness from each LED Fork Reflectors to the
Fairing Vent
20. Using the provided wire ties, secure the LED Fork Reflectors wir-
21. Reinstall the fairing and windshield in the reverse order that it
2 Pin Connector
22. Reconnect the negative battery cable to the battery and reinstall
23. Perform a BCM sync by turning the ignition on, turn the 4 way
24. Test operation of all lighting in all modes before riding.
associated side BCM Adapter Harnesses in the fairing and con-
nect to the Female JAE Connector.
ing harnesses to prevent the wires from being damaged.
was removed. NOTE: THE 4 INNER FAIRING BOLTS ARE
TWO DIFFERENT LENGTHS! The 2 longer bolts go in the top
holes and the 2 shorter bolts go in the bottom holes of the inner
fairing.
the seat.
hazards on, turn the ignition off. Allow the 4 way hazards to run
for 3-4 minutes. Turn the ignition on. Turn the 4 way hazards off.
Turn the ignition off.
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
01/2020