DK Digital PU-500 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zegar DK Digital PU-500. DK Digital PU-500 8 stron. Pendulum clock

Setting the time and date

Press the SET key three times. When the seconds

flash you can reset them by pressing the UP key.

If you press the SHIFT key, the minutes start

flashing. Press the UP key repeatedly or keep it

pressed until the desired number of minutes is

displayed.

If you press the SHIFT key once again, the hours

start flashing. Press the UP key repeatedly until

the desired number of hours is displayed.

Initially the clock will display the time in the

English 12-hour AM/PM format. If you want to use

this format, make sure that the "A" (=AM) or "P"

(=PM) is shown under the hours.

If you want to display time in the 24-hour format,

continue pressing the UP key until "H" is shown

under the time. Now set the hours in 24-hour

mode.

Press the SHIFT key once again and the days start

flashing. Press the UP key until the desired day is

shown.

If you press the SHIFT key once again, the months

start flashing. Press the UP key until the desired

month is shown.

If you press the SHIFT key again, a frame will flash

that later marks the day of the week. Press the UP

key several times in order to select the suitable

frame for the day of the week.

In order to complete the setting, press the SET

key. Now, the time is shown in the display.