Custom Dynamics MPR-MICROAW-18ST Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Adapter Custom Dynamics MPR-MICROAW-18ST. Custom Dynamics MPR-MICROAW-18ST 2 stron. Micro turn signal adapter
Drukuj stronę4. Disconnect the left and right front turn sig-
nal lighting harnesses from the terminal
block connector. Refer to Photo 2.
5. Connect one of the Micro Turn Signal
Adapter harnesses in-line with the bike's
front RIGHT turn signal lighting harness
and the terminal block connector. Connect
one of the Micro Turn Signal Adapter har-
nesses in-line with the bike's front LEFT
turn signal lighting harness and the termi-
nal block connector.
6. Carefully tuck the Micro Turn Signal Har-
nesses into the backbone cavity and re-
mount the terminal block along with the
terminal block rubber boot. Be sure to
leave the Female connectors of the Micro
Turn Signal Harnesses outside of the rub-
ber boot as shown in Photo 3.
7. Connect the Micro Turn Signals (Sold Sep-
arately) to the installed Micro Turn Signal
Adapters.
8. Secure wires to prevent the wires from be-
coming cut, frayed, or pinched.
9. Reconnect the negative battery cable to
the battery and reinstall the seat.
10. Test operation of all lighting before riding.
Questions? Call us at: 1 (800) 382-1388
Installation Instructions - Page 2.
2
3
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
10/2020