DK SONIC DK-1500FTS Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ultradźwiękowy środek do czyszczenia biżuterii DK SONIC DK-1500FTS. DK SONIC DK-1500FTS 8 stron. Ultrasonic cleaner
Drukuj stronę
OPERATION
1. Fill the stainless steel tank with cleaning solution; Plug the power lead into
grounded outlet; Turns on the switch on the back of the ultrasonic cleaner and
press the rotary power knob; After power-on, the LCD screen displays the preset
temperature (25℃ in default), actual environmental temperature, preset time (3
minutes in default), actual time, frequency and power ratio.
2. POWER (ON/OFF): The power knob can be used to turn on or off the machine
by pressing the knob once, and to adjust the value of ultrasonic power from "0%"
to "100%" by rotating the power knob. The power ratio can be displayed on the
right bottom of the LCD screen.
3. Cleaning modes: Common, Degas, Pulse, Turbo Sweep, Power Sweep.
Five cleaning modes can be chosen to clean different stuffs. Especially the power
under each cleaning modes can be adjusted by rotating the power knob.
4. Ultrasonic button: The ultrasonic cleaning can be started or paused by pressing
the "Ultrasonic" button once, and be stopped by keeping pressing the
"Ultrasonic" button for a few seconds. The indicator will be on when ultrasonic
cleaning works, while the indicator will be off and the machine will buzz when
ultrasonic cleaning is finished.
5. Time setting: Press the ultrasonic "+/- " button once to add or decrease one
second cleaning time; keep pressing the ultrasonic "+/- " button to make the time
setting to be added or decreased by seconds, and by minutes after the second
value has reached 59 seconds; press the ultrasonic "+" and "-" buttons
simultaneously to make the machine enter into the "always on" working mode.
6. Heating button: The heating function can be started or stopped by pressing the
"Heating" button once, while if the preset temperature is not 1~2℃ higher than
the actual temperature, the heating function can not be started. Under working
mode, the heating function will start working automatically when the actual
temperature goes down to a value which is 1~2℃ lower than the preset
temperature. In default, the heating function will stop automatically after the
ultrasonic cleaning is finished.
7. Temperature Setting: 1℃ can be added or decreased by pressing the heating
"+/-" once, and the preset temperature can be added or decreased continuously
by keeping pressing the heating "+/-" button.
NOTE: Do not pour water out until it's cooling, Hot water will hurt you and damage
the machine itself.
Shenzhen DeKang Electronic Cleaning Appliances Co.,Ltd
2F, Building 8, Yuanling Industrial Park, Shangwu Community, Shiyan Street, Bao'an District, Shenzhen
Tel.: +86-0755-23575005
Email: [email protected]