Altronix eBridge8E Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik Altronix eBridge8E. Altronix eBridge8E 12 stron. Eight (8) port eoc receiver with integral poe+ switch
Drukuj stronę
Since every Network Configuration is different, please check with your
Network Administrator to see if your eBridge8E unit
should use static IP addresses, or DHCP assigned IP addresses and/an
Inbound Port assignment prior to setting up network connection.
1. Click Network Settings link.
You will be prompted for an administrative password,
type and submit the password.
User name: admin
Password: admin
2. Network Setup page will be displayed.
You may now configure your eBridge8E unit for network connection.
NETWORK SETTING MENU.
This menu is for configuring the EBridge8E units for a network connection.
www.altronix.com
Configuring eBridge8E units for network connection:
Fig. 2
x
eBridge Setup
192.168.168.168
Authentication Required
The server http://192.168.168.168:80 requires a username and
password. The server says: Altronix webpage.
Status
Setup
Network Settings
Data Pair
Maximum Power Draw (Watts)
0
Date/Time:
Fig. 3
eBridge Network Settings x
192.168.168.168/networksetup.htm
Status
Setup
Network Settings
eBridge8e
Site ID: Altronix Site ID
Network Settings:
IP Address Method:
Static
192.168.168.168
IP Address:
255.255.255.0
Subnet Mask:
192.168.168.100
Gateway:
80
Inbound Port:
Submit Network Settings
Reboot Server
- 6 -
x
Management Interface
User Name:
Password:
Log In
Cancel
Actual Power Draw Watts
0
Management Interface
Trap Receiver Settings:
Trap Receiver Address 1:
Trap Receiver Address 2:
Trap Receiver Address 3:
Trap Receiver Address 4:
Trap Receiver Address 5:
Submit Trap Receiver IP Settings
Syslog Settings:
Syslog Server IP:
Syslog Server Port:
x
Version 0.88
Status
Port Status
Enabled
x
Version 0.88
Network Settings
Monday, May 16 2014 [11:11 am]
10.10.10.53
10.10.10.76
10.10.10.12
10.10.10.13
10.10.10.14
10.10.10.15
100
Submit Syslog Settings
eBridge8E