DK2 Power OPD811 Instrukcje bezpieczeństwa i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcje bezpieczeństwa i obsługi dla Sprzęt budowlany DK2 Power OPD811. DK2 Power OPD811 14 stron. Big dump elec drive hydraulic dump
Również dla DK2 Power OPD811: Instrukcja instalacji (13 strony), Instrukcja montażu (11 strony)
Drukuj stronę
PART III: Operating the BIG DUMP
It may be helpful to better familiarize yourself with the features of your machine
before beginning the steps outlined in this chapter.
WARNING
A. Read and understand all instructions, safety precautions, and/or warnings
listed in "PART I: General Safety Rules" before operating the machine. If
any doubt or question arises about the correct or safe method of performing
anything found in this manual, please contact DK2POWER.
B. Knowing the correct and incorrect methods of using the machine. Never
using an incorrect or unsafe method.
Before Using:
1. Using the battery charger supplied to charge the batteries until the green
light on the charger comes on.
2. Check the control cables, condition of wiring, tire pressure and all nuts/bolts.
Moving Forward：
1. Turn the MAIN SWITCH to "ON" position on the front panel.
2. Select "Forward" position on the toggle switch on the left handle.
3. Press the toggle switch forward.
4. Release the parking brake.
5. The speed of the dumper is controlled by the amount of throttle, which is on
the right handlebar. The throttle can be regulated to increase or decrease the
speed.
Moving Backward：
1. Release the right handle to stop the Dumper.
2. Move the switch toggle switch to "Backward".
3. Press the throttle to move the Dumper backward.
STOP:
Release the throttle. Use the hand brake on the left handle. The Dumper will
slow down and stop. Set the parking brake when not in use.
Part III: Operating the BIG DUMP
6