DK2 Power OPC566E Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Rębaki/Rozdrabniacze DK2 Power OPC566E. DK2 Power OPC566E 17 stron. Tips, tricks & frequent questions
Również dla DK2 Power OPC566E: Arkusz informacyjny (13 strony)
Drukuj stronę
required, see your authorized dealer for engine governor adjustments.
I.
Keep combustible substances away from the engine when it is hot.
J.
Never cover the machine while the muffler is still hot.
K. Do not operate the engine with the air cleaner or the carburetor air intake cover
removed. Removal of such parts could create a fire hazard. Do not use flammable
solutions to clean the air filter.
L.
The muffler and engine become very hot and can cause a severe burn; do not touch.
General Safety
WARNING
Operating this Wood Chipper safely is necessary to prevent or minimize the risk of death or
serious injury. Unsafe operation can create several hazards for you. Always take the
following precautions when operating:
A. Your Wood Chipper is a powerful tool, not a plaything. Exercise extreme caution
always. The machine is designed to Chip Woods. Do not use it for any other purpose.
B.
Know how to stop the Wood Chipper quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to
avoid slipping or falling.
D. See manufacturer's instructions for proper operation and installation of accessories.
E.
Never use the machine without ensuring that all guards and shields are in place.
F.
Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard
parts on the Wood Chipper. This includes all shields and guards. Modifications to your
machine could cause personal injuries and property damage and will invalid your
warranty.
G. If the machine starts to make an unusual noise or vibrate, shut down the engine,
disconnect the spark plug wire, keeping it away from the spark plug to prevent
accidental starting, wait 5 minutes for engine to cool down, then inspect for damage.
Vibration is generally a warning of trouble. Check damaged parts and clean, repair
and/or replace as necessary.
H. Never tamper with safety devices. Check their proper operation regularly.
I.
Before performing any maintenance or inspection procedure, shut down the engine,
disconnect the spark plug wire keeping it away from the spark plug to prevent
accidental starting, wait 5 minutes for machine to cool down.
J.
Never allow people who are unfamiliar with these instructions to use the Wood Chipper.
Allow only responsible individuals who are familiar with these rules of safe operation to
use your machine.
K. Never overload or attempt to chip woods beyond the manufacturer's recommendation.
It could result in personal injury or damage to the machine.
L.
While using, don't hurry or take things for granted. When in doubt about the
equipment or your surroundings stop the machine and take time to look things over.
M. Never operate the machine when under the influence of alcohol, drugs, or medication.
Part I: General Safety Rules
6