Altuscn KN2132 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik matrycowy Altuscn KN2132. Altuscn KN2132 2 stron. Kvm over the net

Drukuj stronę

Hardware Installation 2

Refer to the connection diagrams for connection examples as you do the following:

1. Plug your Local Console's keyboard, monitor, and mouse into the unit's Console Ports. Each

port is color coded and marked with an appropriate icon

Note: 1. You can use any combination of keyboard and mouse connections. For example,

you can use a PS/2 keyboard with a USB mouse.

2. USB keyboards and mice can plug into the USB ports on the front panel, as well as

into the ports in the console port section.

3. The KN2116A / KN2132 / KN4116 / KN4132 does not support distances that

exceed 20m between itself and the local monitor.

2. Use Cat. 5e/6 cable to connect any available KVM port to a KVM Adapter Cable that is

appropriate for the server you are installing.

Note: The distance between the KN2116A / KN2132 / KN4116 / KN4132 and the KVM

Adapter Cable must not exceed 40m.

3. Plug the connectors on the KVM Adapter Cable into the appropriate ports of the server you

are installing.

4. Plug a cable from the LAN or WAN into the KVM Over the NET™ switch primary network

interface socket.

5. (Optional) Plug another cable from the LAN or WAN into the KVM Over the NET™ switch

backup (secondary) network interface socket.

6. (Optional) Use Cat 5e/6 cable to connect the KVM Over the NET™ switch PON port to an

SA0142 Adapter. Connect the Adapter to the PON IN port of a PN0108 Power Over the Net™

unit.

7. (Optional) Use Cat 5e/6 cable to connect the KVM Over the NET™ switch Modem port to

an SA0142 Adapter. Connect the Adapter's serial connector to the modem's DB-9 port.

8. Use the grounding wire supplied with this package to ground the unit by connecting one end

of the wire to the grounding terminal, and the other end of the wire to a suitable grounded

object.

9. Plug the power cord(s) supplied with this package into the KVM Over the NET™ switch

power socket, and then into an AC power source.

After the KN2116A / KN2132 / KN4116 / KN4132 is cabled up you can turn on the power.

After it is powered up, you can turn on the servers.

Modem

Hardware Installation 3

Mouse DynaSync is only available for Windows and Mac (OS4.0 or higher). Systems connected

to the KN2116A / KN2132 / KN4116 / KN4132 with a KA9170 and KA7170 KVM Adapter,

and whose adapter attribute OS setting is configured for Win or Mac All other configurations

must use manual mouse synchronization. These procedures are to be performed on the

computers attached to the KN2116A / KN2132 / KN4116 / KN4132's ports - not on the

computer you are using to access the KN2116A /KN2132 / KN4116 / KN4132.

Windows Systems:

Note: You must use the generic mouse driver supplied with Windows.

• XP / Server 2003 -- middle position; Enhance pointer precision: off

• 2000 / ME -- Mouse motion: middle position; Acceleration: off

• NT / 98 / 95 -- Mouse speed: slowest

Sun / Linux Systems:

Open a terminal session and issue the following command:

• Sun: xset m 1

• Linux: xset m 0

Administrator Setup

Once the KN2116A / KN2132 / KN4116 /

KN4132 has been cabled up, the Super

Administrator needs to set the unit up for user

operation using the local console. When the local

console has been connected up and the KN2116A

/ KN2132 / KN4116 / KN4132 turned on, a login

prompt appears on the console monitor:

Since this is the first time you are logging in, use the default Username: administrator; and the

default Password: password. For security purposes, use the User Management function to

change these to a unique Username and Password

Select Device Management → Network to set up the switch for network operation.

PN0108

• If you are only using one LAN but connect both ports in case the primary connection fails,

check Redundant NIC; if you are using the secondary LAN port for a second IP address, leave

Redundant NIC unchecked:

• For dynamic IP address assignment, select Obtain an IP address automatically.

• To specify a fixed IP address, select Set IP address manually, and fill in the IP address.

• For automatic DNS Server address assignment, select Obtain DNS Server address automatically.

• To specify the DNS Server address manually, select Use the following DNS Server, and fill in

the addresses for the Primary and Alternate DNS servers.

• If you are using the secondary LAN port for a second IP address, drop down the list under

Redundant NIC and select Network Adapter 2 and set the IP and DNS addresses for it.

To change the default username and password → Select User Management → administrator →

Modifiy to change the default Super Administrator username and password to something

unique.

To add users, select users in the left panel at the user management page, then click Add the

bottom of the main panel.

Operation

After you have successfully logged in, the KN2116A /KN2132 / KN4116 / KN4132 Main Screen

appears with the Port Access page displayed.

The Control Panel

The KN2116A /KN2132 / KN4116 / KN4132

has a hidden control panel, located at the

bottom center of the screen. The panel

becomes visible when the mouse pointer

moves over it.

The Control Panel consists of an icon bar at the top, with two text bars below it. The upper text

bar shows the remote display's video resolution; the lower bar shows the remote IP address at the

left and the bus that the logged in user is on at the center. Information about the functions that the

Control Panel items perform appears when you move the mouse over them.

The functions that the icons perform are described in the table below:

This is a toggle. Click to make the Control

Click to bring up the on-screen keyboard

Panel persistent – i.e., it always displays on

top of other screen elements. Click again to

Click to select the mouse pointer type.

have it display normally.

Click to toggle Automatic or Manual mouse

Click to bring up the Macros dialog box

sync.

• When the selection is Automatic, a green √

Click to bring up the Video Options dialog

appears on the icon.

box. Right-click to perform a quick Auto

• When the selection is Manual, a red X appears

Sync

on the icon.

Click to perform a video and mouse autosync

Click to display a dropdown list of User macros.

operation. It is the same as clicking the

Access and run macros more conveniently

Auto-sync button in the Video Options

rather than using the Macros dialog box

dialog

Toggles the display between Full Screen

Click to bring up the Control Panel

Mode and Windowed Mode.

Configuration dialog box.

Click to take a snapshot (screen capture)

Click to exit the viewer.

of the remote display.

• Exiting from a viewer accessed session brings

you back to the web browser Main Page.

Click to bring up the Message Board.

• Exiting from a WinClient AP session logs you

out and brings you back to the login dialog

Click to send a Ctrl+Alt+Del signal to

box.

the remote system.

• Exiting from a Java Client AP session logs you

out and closes the Java program.

Click to toggle the remote display

between color and gray scale views.

These Lock Key LEDs show the Num Lock,

Caps Lock, and Scroll Lock status of the remote

Click to zoom the remote display

computer. Click on the icon to toggle the status.

window.

Port Access

Click on a port in the left panel to switch to that port. The OSD provides a toolbar to help you

control the KN2116A /KN2132 / KN4116 / KN4132 from within the captured port. To bring up

the toolbar, tap the OSD Hotkey (Scroll Lock), twice. The toolbar appears at the upper left corner

of the screen.

• Information about the functions that the Toolbar items perform appears when you move the

mouse over them.

• To dismiss the toolbar and bring back the Port Access page, tap the OSD Hotkey once.

Specifications

Function

KN2116A

KN2132

Computer

Direct

Connections

Max

256 (via Cascade)

512 (via Cascade)

Console

Local

Connections

Remote

Port Selection

Pushbutton/ GUI/ Hotkey

Keyboard

1 x 6-pin Mini-DIN , 1 x USB Type A

Console Port

Video

1 x HDB-15

Mouse

1 x 6-pin Mini-DIN, 1 x USB Type A

KVM Port

16 x RJ-45

32 x RJ-45

Connectors

Power

1 x 3-prong AC socket

LAN

2 x RJ-45

PON

1 x RJ-45

Modem

1 x RJ-45

USB

Switches

Reset, Power, Port Selection

LEDs

On Line, Selected, Power, Link 10 / 100 / 1000 Mbps

Emulation

Keyboard/Mouse

PS/2 / USB (PC, Mac, Sun) / Serial

Video

1600 x 1200 @ 60Hz; DDC2B

Scan Interval

1 – 255 Seconds

I/P Rating

100-240VAC; 50-60Hz; 1.0A

110V/33.00W

110V/33.40W

Power Consumption

230V/33.80W

230V/34.20W

Operating Temp.

Environment

Storage Temp.

-20—60℃

Humidity

0—80% RH, Non-condensing

Housing

Physical

Weight

5.46 kg

5.59 kg

Properties

Dimensions ( L x W x H )

43.36 x 41.35 x 4.40 cm(19" 1U)

KN4116

KN4132

256 (via Cascade)

512 (via Cascade)

16 x RJ-45

32 x RJ-45

3 x USB

110V/39.60W

110V/45.80W

230V/40.00W

230V/46.30W

0-50℃

Metal

5.52 kg

5.63 kg