Artistic Licence moody x10 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt oświetleniowy Artistic Licence moody x10. Artistic Licence moody x10 4 stron.

Drukuj stronę

Step 3 - programme the white level

moody's indicator LED flashes white to acknowledge it has entered

white level programming mode, then displays the white level of the

zone.

Wait 5 seconds; moody will start slowly cycling through the white

levels. When you see the white level you want, briefly press the

control.

Alternatively, rotate the control clockwise or counter-clockwise

to increase or decrease the white level. When you see the white

level you want, briefly press the control.

N.B. In moody z, the white level is really saturation - it controls

the amount of white that is mixed in with the colour and allows

shades to be created.

Step 4 - programme the other zones

Programming of zone 1 is now complete. moody's indicator

LED flashes

red

to acknowledge that it is ready to accept colour

programming for zone 2. Repeat steps

Step 5 - exit programming mode

When programming of all zones is complete, press and hold

the control for 3 seconds to exit programming mode. moody

acknowledges by flashing green.

Step 6 (end)

moody displays the master level (100%) and colour of zone 1. It is

now in normal operating mode.

for each zone.