Artistic Licence moody z1 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt oświetleniowy Artistic Licence moody z1. Artistic Licence moody z1 4 stron.

Operation (moody z series)

From factory, all scene channels are programmed to cyan. At power on, moody will automatically

fade the master level to full over 5 seconds.

If lights are on, briefly press the control: moody fades the master level to zero over 5 seconds.

If lights are off, briefly press the control: moody fades the master level to full over 5 seconds.

Rotate control clockwise or counter-clockwise to change the colour of zone 1. The LED indictor

shows the master level (always 100%) and colour of zone 1.

To programme a scene: please see instructions below on how to set the intensity and colour

of each zone.

Programming (moody z series)

Step 1

To enter programming mode, press and hold control for 3 seconds.

Step 2 - programme the colour (hue)

moody's indicator LED flashes

colour programming mode, then shows the colour of the zone.

Wait 5 seconds; moody will start slowly cycling through the colour

palette. When you see the colour you want, briefly press the

control.

Alternatively, rotate the control clockwise or counter-clockwise to

move forwards or backwards through the colour palette. When

you see the colour you want, briefly press the control.

N.B. During the programming process, the relevant lights will

change to show the effect of your zone programming.

red

to acknowledge it has entered