Artistic Licence Rail-Split extreme Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kable i złącza Artistic Licence Rail-Split extreme. Artistic Licence Rail-Split extreme 8 stron.

Drukuj stronę
DMX512 Wiring
XLR Pin (Convention)
Overview
Rail-Split extreme is a fully bi-directional DMX512 splitter and distribution amplifier, with the
added feature of a 'data fixer' for DMX. The latter functionality is used for resolving flickering
problems arising from product incompatibility issues - see 'Fixer Mode' on page 6 for more
information.
Rail-Split extreme offers all the functionality of its sister product, Rail-Split RDM. Both products
feature electrocution protection (self-healing) on the input, loop and all outputs (up to 425 VAC
continuous connection).
Additionally, Rail-Split extreme provides surge protection. This feature is aimed at protecting the
product and connected equipment against voltage surges of the type generated by lightning.
The protection is sacrificial which means that after a certain number of protection events, the
protection circuitry will be destroyed (see Specification on page 7).
Key features
Input Optical Isolation
y
Six independent outputs
y
Bi-directional outputs
y
Optimized
for
y
environments
Mains electrocution protection (self-
y
healing) on input, loop and outputs
Surge protection (sacrificial) on input,
y
loop and outputs
RDM (Remote Device Management
y
Draft & Standard V1.0)
DMX512-A compatible
y
Microprocessor controlled
y
Surface mount or DIN rail mounted
y
DMX-Fix mode to handle compatibility
y
issues
Rail-Split extreme User Guide
1
2
3
electrically
noisy
Function
Ground
Data -
Data +
Connections
Input
The DMX512 input is attached via three screw
terminals. Please refer to the connections
diagram.
Loop-Through
A passive loop-through connection allows
onward connection to other DMX512 devices.
If this feature is not required then the signal
must be terminated. The product contains an
internal termination resistor. This is enabled by
fitting a wire link between the screw terminals
that will terminate the DMX line (Term and
DAT+).
Output
Six DMX512 outputs are provided. Each output
is capable of driving 32 additional DMX512
devices. It is not necessary to terminate any
outputs that are not connected. However, a
terminator must be connected to the final
DMX512 device.
Colour
Black
Blue
Red
Page 4