Artistic License vSplit mono xlr5-5 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Systemy wejścia/wyjścia Artistic License vSplit mono xlr5-5. Artistic License vSplit mono xlr5-5 14 stron. Versasplit dmx/rdm; crmx; ethb input module
Drukuj stronęCircuit
Chassis
Bonded to Earth-Ground
Type
DMX512
Pin 1
input
Shell
module
Type
Ethernet
input
Screen
module
Type
Base unit
DMX512
Pin 1
outputs
(mono,
Shell
duo)
Type
Base unit
DMX512
Pin
outputs
Shell
(iso)
Internal
Connects to Earth-Ground via 10
Logic
Ground
versaSplit outputs
All the versaSplit carrier units feature DMX/
RDM outputs, which may use XLR3, XLR5
or XLR8 (Ethercon RJ45) connectors. For
versaSplit duo, each output connector has a
switch to the lower left that defines which input
module, A or B, is connected. versaSplit iso
features individually isolated outputs. Each
output is independently buffered and can drive
up to 32 DMX devices. It is not necessary to
terminate any unused outputs.
extreme models
versaSplit extreme models offer all
the features of the standard product,
while additionally providing surge
protection. This feature is aimed at
protecting the product and connected
equipment against voltage surges
of the type generated by lightning.
The protection is sacrificial which
means that after a certain number
of protection events, the protection
circuitry will be destroyed (see
relevant product datasheet).
versaSplit User Guide
Description
Optically isolated
Isolated
The connector shell is
connected to chassis
Transformer isolated
Connects to Earth-Ground
via 75 Ohm resistance &
100 pF capacitance, as
specified in IEEE standard
Ground referenced
Connected to Internal
Logic Ground
The connector shell is
connected to chassis
Isolated
Isolated
The connector shell is
connected to chassis
Ohm resistance
DMX/RDM input modules
When versaSplit is fitted with one (or two)
DMX/RDM input modules, it acts as a one
(or two) input splitter / data fixer.
The XLR modules feature a male input and
female loop-through connector. The latter
must be terminated if not being used.
The Ethercon RJ45 module should be used
with Cat5 cable.
The inputs on all 3 types of modules are
optically isolated from the outputs and mains
earth. This isolation offers protection from
potentially dangerous high voltage accidents.
Also it can eliminate potential earth/ground
differential issues as the input is not electrically
connected to any of the outputs.
XLR Pin
Function Colour
(convention)
1
Ground
2
Data -
3
Data +
4
Aux
Data -
5
Aux
Data +
DMX512 Wiring
RJ45
Pin
Black
7 & 8
White/Brown
Blue
2
Red
1
6
3
White/Green
3-pin
male
XLR
input
5-pin
male
XLR
input
Ethercon
RJ45
input
Cable
Colour
& Brown
Orange
White/
Orange
Green
Page 6