Altusen KVM OVER THE NET KN2132 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Altusen KVM OVER THE NET KN2132. Altusen KVM OVER THE NET KN2132 2 stron. Altusenkvm over the net

Drukuj stronę

Hardware Installation 2

Refer to the connection diagrams for connection examples as you do the following:

1. Plug your Local Console's keyboard, monitor, and mouse into the unit's Console Ports. Each

port is color coded and marked with an appropriate icon

Note: 1. You can use any combination of keyboard and mouse connections. For example,

you can use a PS/2 keyboard with a USB mouse.

2. USB keyboards and mice can plug into the USB ports on the front panel, as well as

into the ports in the console port section.

3. The KN2116A / KN2132 / KN4116 / KN4132 does not support distances that

exceed 20m between itself and the local monitor.

2. Use Cat. 5e/6 cable to connect any available KVM port to a KVM Adapter Cable that is

appropriate for the server you are installing.

Note: The distance between the KN2116A / KN2132 / KN4116 / KN4132 and the KVM

Adapter Cable must not exceed 40m.

3. Plug the connectors on the KVM Adapter Cable into the appropriate ports of the server you

are installing.

4. Plug a cable from the LAN or WAN into the KVM Over the NET™ switch primary network

interface socket.

5. (Optional) Plug another cable from the LAN or WAN into the KVM Over the NET™ switch

backup (secondary) network interface socket.

6. (Optional) Use Cat 5e/6 cable to connect the KVM Over the NET™ switch PON port to an

SA0142 Adapter. Connect the Adapter to the PON IN port of a PN0108 Power Over the Net™

unit.

7. (Optional) Use Cat 5e/6 cable to connect the KVM Over the NET™ switch Modem port to

an SA0142 Adapter. Connect the Adapter's serial connector to the modem's DB-9 port.

8. Use the grounding wire supplied with this package to ground the unit by connecting one end

of the wire to the grounding terminal, and the other end of the wire to a suitable grounded

object.

9. Plug the power cord(s) supplied with this package into the KVM Over the NET™ switch

power socket, and then into an AC power source.

After the KN2116A / KN2132 / KN4116 / KN4132 is cabled up you can turn on the power.

After it is powered up, you can turn on the servers.

Modem

Hardware Installation 3

Mouse DynaSync is only available for Windows and Mac (OS4.0 or higher). Systems connected

to the KN2116A / KN2132 / KN4116 / KN4132 with a KA9170 and KA7170 KVM Adapter,

and whose adapter attribute OS setting is configured for Win or Mac All other configurations

must use manual mouse synchronization. These procedures are to be performed on the

computers attached to the KN2116A / KN2132 / KN4116 / KN4132's ports - not on the

computer you are using to access the KN2116A /KN2132 / KN4116 / KN4132.

Windows Systems:

Note: You must use the generic mouse driver supplied with Windows.

• XP / Server 2003 -- middle position; Enhance pointer precision: off

• 2000 / ME -- Mouse motion: middle position; Acceleration: off

• NT / 98 / 95 -- Mouse speed: slowest

Sun / Linux Systems:

Open a terminal session and issue the following command:

• Sun: xset m 1

• Linux: xset m 0

Administrator Setup

Once the KN2116A / KN2132 / KN4116 /

KN4132 has been cabled up, the Super

Administrator needs to set the unit up for user

operation using the local console. When the local

console has been connected up and the KN2116A

/ KN2132 / KN4116 / KN4132 turned on, a login

prompt appears on the console monitor:

Since this is the first time you are logging in, use the default Username: administrator; and the

default Password: password. For security purposes, use the User Management function to

change these to a unique Username and Password

Select Device Management

PN0108

• If you are only using one LAN but connect both ports in case the primary connection fails,

check Redundant NIC; if you are using the secondary LAN port for a second IP address, leave

Redundant NIC unchecked:

• For dynamic IP address assignment, select Obtain an IP address automatically.

• To specify a fixed IP address, select Set IP address manually, and fill in the IP address.

• For automatic DNS Server address assignment, select Obtain DNS Server address automatically.

• To specify the DNS Server address manually, select Use the following DNS Server, and fill in

the addresses for the Primary and Alternate DNS servers.

• If you are using the secondary LAN port for a second IP address, drop down the list under

Redundant NIC and select Network Adapter 2 and set the IP and DNS addresses for it.

To change the default username and password

Modifiy to change the default Super Administrator username and password to something

unique.

To add users, select users in the left panel at the user management page, then click Add the

bottom of the main panel.

Network to set up the switch for network operation.

Select User Management

administrator

Operation

After you have successfully logged in, the KN2116A / KN2132 / KN4116 / KN4132 Main Screen appears with

the Port Access page displayed.

The Control Panel

The Control Panel consists of three rows: a row of icons at the top, with two text rows below it.

By default, the upper text row shows the video resolution of the remote display. As the mouse pointer moves

over the icons in the icon bar, however, the information in the upper text row changes to describe the icon's

function. In addition, if a message from another user is entered in the message board, and you have not opened

the message board in your session, the message will appear in the upper row.

The lower row shows the IP address of the device you are accessing at the left of the row. The center of the

row indicates which bus the user is on (the number before the slash), and the total number of users on that bus

(the number behind the slash).

Right clicking in the text row area brings up a menu-style version of the toolbar

The functions that the icons perform are described in the table below:

Control Panel

Zoom in

Macros

On-screen keyboard

Video Options

Mouse pointer type

Video and mouse

Automatic mouse sync

autosync operation

User macros list

Full Screen Mode

Snapshot

Skip to the first port

Skip to the previous

Message Board

port

Click to send a

Skip to the next port

Ctrl+Alt+Del

Toggle color and gray

Skip to the latest port

scale views

Port Operation

The KVM Over the NET™ switch's interface provides a toolbar to help you with port switching operations

from within the captured port. To bring up the toolbar, tap the GUI Hotkey (Scroll Lock or Ctrl) twice. The

toolbar appears at the upper left corner of the screen.

Note:

1. You can adjust the toolbar transparency.

2. The toolbar functions and icons are also incorporated in the Control Panel. If you choose to

enable them in the Control Panel, you can disable the Toolbar . To recall the Port Access

Connections page when there is no Toolbar, simply tap the GUI hotkey twice.

Specifications

Function

KN2116A

KN2132

Computer

Direct

Connections

Max

256 (via Cascade)

512 (via Cascade)

Console

Local

Connections

Remote

Port Selection

Pushbutton/ GUI/ Hotkey

Keyboard

1 x 6-pin Mini-DIN , 1 x USB Type A

Console Port

Video

1 x HDB-15

Mouse

1 x 6-pin Mini-DIN, 1 x USB Type A

KVM Port

16 x RJ-45

32 x RJ-45

Connectors

Power

1 x 3-prong AC socket

LAN

2 x RJ-45

PON

1 x RJ-45

Modem

1 x RJ-45

USB

Switches

Reset, Power, Port Selection

LEDs

On Line, Selected, Power, Link 10 / 100 / 1000 Mbps

Emulation

Keyboard/Mouse

PS/2 / USB (PC, Mac, Sun) / Serial

Video

1600 x 1200 @ 60Hz; DDC2B

Scan Interval

1 – 255 Seconds

I/P Rating

100-240VAC; 50-60Hz; 1.0A

110V/33.00W

110V/33.40W

Power Consumption

230V/33.80W

230V/34.20W

Operating Temp.

Environment

Storage Temp.

-20—60℃

Humidity

0—80% RH, Non-condensing

Housing

Physical

Weight

5.46 kg

5.59 kg

Properties

Dimensions ( L x W x H )

43.36 x 41.35 x 4.40 cm(19" 1U)

Auto Scan Mode

Panel Array Mode

Compensation mode

selection

Recall the GUI

Control Panel

Configuration

Exit

Lock indicator

KN4116

KN4132

256 (via Cascade)

512 (via Cascade)

16 x RJ-45

32 x RJ-45

3 x USB

110V/39.60W

110V/45.80W

230V/40.00W

230V/46.30W

0-50℃

Metal

5.52 kg

5.63 kg