ArtiVisuals Mix-iT Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Panel sterowania ArtiVisuals Mix-iT. ArtiVisuals Mix-iT 14 stron.

Menus

When pressing rotary 1 to 3 you switch to the menus:

rotary 1 is for the IP-configuration menu,

rotary 2 for button mapping and

rotary 3 for controlling the overlays and shortcuts.

Mix-iT is connected to vMix via a network connection. This can simply be a cable

between switcher and controller, or both devices can be connected via a hub or switch.

After you have made the physical connection, you have to check the IP parameters.

Each network device or node requires a unique address, and must be told the address

of the vMix computer.

Enter the IP configuration menu by shortly pressing rotary one.

Next, you can step through the menu items by turning the rotary knob. Clicking once

again enters that selected menu item.

1. Load Defaults

If you enter this option and confirm by selecting and clicking 'OK', the default

settings for the IP-settings are loaded. These settings are:

192.168.10.200 for the Mix-iT,

and 192.168.10.210 for the vMix PC

2. Mix-iT IP address

If you enter this menu entry, you can change the IP Address of the Mix-it. You

should enter an address that differs from the vMix address, but it must be located

in the same subnet. Almost always, only the last number of 3 digits will differ from

the switcher address.

3. Netmask

In most networks this should be 255.255.255.0.

4. vMix IP address

This is an important setting, if it is not correct there will be no connection between

Mix-iT and vMIx. You can find the switcher address in vMix under settings - web

controller. You don't have to enter the port address.

User Guide Mix-iT for vMix v1.0

- 8 -