Alu Rehab NETTI DYNAMIC BASE Podręcznik - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik dla Wózek inwalidzki Alu Rehab NETTI DYNAMIC BASE. Alu Rehab NETTI DYNAMIC BASE 16 stron.
•
ARM SUPPORTS - NETTI III:
Check that the lock track is cleaned. Ensure that the
position screw is mounted and in the correct posi-
tion. Check that the arm support pads are mounted
with two screws on each side, check that the screws
are tight. Place the arm support in the cleaned arm
support bracket on the frame, Move the arm sup-
port forwards and rearwards slowly while screwing
the lock screw inwards. When play in the arm sup-
ports has been removed, tighten the lock nut.
•
ARM SUPPORT LOCK NETTI 4U:
Ensure that the lock and release mechanism works.
Check depth/length displacement of the arm sup-
port pads, tighten the screws in the arm support
pads.
•
PUSH HANDLES :
Check the push handles for wear and damage. If
hand-grips are worn, the complete push handle
must be replaced. Ensure that the security screw is
fitted. Check that the shelter studding in the plastic
bracket is not deformed.
•
PUSH BOW:
Check all screws and fastening points. Remove
loose screws, clean with methylated spirit and re-fit
using Thread Lock glue, (full locking).
Check that the tilt and back release handles are
marked with correct symbols. Replace adjusting
handles and wheels if necessary.
If the cleaning routine has not been followed and
driving handles/hand grips have been incorrectly
cleaned, replace with new.
•
BACK REST UNIT:
Check Velcro back for damage in sewing and lock.
If necessary clean the Velcro with a damp cloth.
Tighten the straps.
The Velcro "male" can be cleaned with a steel file
brush.
•
HEAD SUPPORT:
Check that the head support is clean and that there
are no abrasions or tears.
Replace the head support if the wheelchair is for a
new user. Oil screws and wheels.
Check and replace handles and wheels if necessary.
10
Depth shift lock
Release mechanism
Position lock
Velcro back
Adjustment handle
Washing manual for manual wheelchairs
Arm support pad
Positioning screw
Rubber
grip
Security
screw
Push bow
Head support
bracket
Position lock
Release handle
Version: 2022-05