DKN technology 20409 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Fitness Trackery DKN technology 20409. DKN technology 20409 2 stron. Ble smar heart rate sensor

Drukuj stronę

TURN ON HEART RATE TRANSMITTER

Bluetooth smart:

The BLE smart Heart Rate Transmitter is compatible with iPhone 4S/5/6,

iPod Touch (5th generation), iPad (3rd and 4th generation) and Android

4.3 or higher. It is also compatible with some sport watches with BLE

smart support such as Polar loop, etc...

Please follow the following steps to connect to a smartphone.

Step 1. Go to Device Settings->General->Bluetooth.

Step 2. Turn On Bluetooth. The Bluetooth

with an application.

Step 3. Pick a compatible fitness application from the "app store" and

download it to the phone. Select a fitness application. For example,

Wahoo fitness, Endomondo, Runtastic, Starve, RunKeeper,

Cyclemeter, 321Run, BLE Heart Rate Monitor, MapMyFitness,

MapMyRide, etc...

Step 4. Pair the Bluetooth Heart Rate Transmitter with the fitness

application in the application settings.

Note:

Some applications may not be compatible. Check the published

specifications.

Remark:

1. Every Bluetooth smart device has its setting and operating method, how

to pair with the chest belt, please refer to the devices' user manual.

2. Bluetooth smart can be used simultaneously. There's no interference

problem.

MAINTENANCE OF THE ELASTIC STRAP

The textile strap can be washed in delicate machine wash at +40°C/104°F

with most common laundry detergents. Use of detergents with optical

brightening agents, detergents with bleaching agents, soap or fabric

softener is not recommended. Use of a laundry pouch is recommended.

Machine washing has less variation than hand washing and for this reason

the machine washing is recommended instead of hand-washing.

The strap does not resist soaking，dry - cleaning or bleaching.

★

The strap should be dry flat, hang dry or drip dry.

★

NOTICE:

1 .Wet strap should not be stretch unnecessarily. Strap does not tumble

drying and should not be wring dry. Ironing and pressing with heat are

forbidden.

2. Detach the connector from the strap and rinse the strap under running

water after every use.

3. Sweat and moisture may keep the electrodes wet and the transmitter

activated. This will reduce the transmitter battery life.

4. To keep the product best performance，please wipe out the sweat on

metal buttons with clear water to avoid rusty, causing bad transmission.

TROUBLE SHOOTING:

No Heart Rate or "ZERO" Display

- Re-wear it as instructed.

★

- Stay away from power lines or other electromagnetic sources.

★

- Moisten the electrode sensing area of the textile strap.

★

- If there's no heart rate value display, please take out the battery and

★

wait for about 1 minute, then re-install the battery.

- Avoid using the device outside of the following temperature Range

★

0°C ~ 50°C (32°F~122°F), slow or black display may occur.

smart device will pair directly

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept

any interference received, including interference that may cause undesired

operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

TECHNICAL SPECIFICATIONS

Strap Length:

88 cm (fit for chest: 70-120cm/ 27.5"47.2")

Battery Lifetime (approx): 1000 hours (1 yr with 1 hr/day usage)

Battery:

CR2032X1pc (included)

Transmission Range:

up to 10 feet

Waterproof:

IPX 7

Operating temperature:

0°C~50

Weight:

47g (transmitter + textile strap+ battery)

Works with iPhone 4S/5/6, new iPad (3/4th Generation) &

★

Android 4.3 or above with Bluetooth smart

Recommended apps: Runmeter, Runkeeper, Runtastic, Endomondo,

Wahoo Fitness, Strava, Cydemeter, 321 Run, BLE Heart Rate Monitor,

MapMyFitness, MapMyRide etc...

Battery lifetime calculation is based on normal transmitting power

★

Consumption in a lab, not include non-connecting condition.

C(32

F~122°F)

support smartphones.

(2017-03-01)