Alula RE306 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria Alula RE306. Alula RE306 2 stron. Tilt sensor dsc compatible

Resolution Compatibles

Tilt Sensor

is a full-featured security transmitter typically

used to sense the tilt of overhead garage doors and

windows. It will alarm when the sensor is tilted more

than 45 degrees.

Features

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll

by placing the panel into wireless enrollment

mode and then sending an enrollment signal from

the sensor.

Options for sending an Enrollment Signal

• Remove the battery tab and cover to

trip tamper.

Install

by mounting the sensor to the inside of

a door or window using the mounting screw

locations. For garage door installations, the

sensor should be mounted to the top panel of the

overhead door.

Tilt Detection

exceeds a 45 degree angle. If the

sensor rotates further than 135

degrees, it is likely to remain in a

non-alarm state. For best results,

the sensor should rotate within 90

degrees to ensure an alarm state

occurs.

RE306 Tilt Sensor

DSC

occurs when the sensor

Use the panel installation guide to verify proper system setup.

Compatible

Mounting

Screw

Holes

Cover-Securing

Screw Hole