artograph 225-995 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer artograph 225-995. artograph 225-995 12 stron. Digital art projector tripod

Drukuj stronę

Vertical Projection

(Fig. 9 & 10)

To position the projector for vertical projection (either down

Fig. 9

or up), loosen the Panning Locking Knob and rotate the

ball head until the slot on the side is positioned between

any two legs then lock panning knob. Loosen the Ball

Head Knob while holding the projector firmly and drop the

ball head and projector down into the side slot. Position

projector so the lens is pointing downward for table top

projection or upward to project onto the ceiling , then

retighten the Ball Head Knob.

Please Note: It is not necessary to position the

projector perfectly vertical as the Keystone adjustment

built into the projector can be used to square up the

image.

Caution: Always keep a firm grip on the projector

whenever loosening the Ball Head Knob to prevent the

projector from moving too abruptly.

Additional Features

Fig. 10

(Fig. 11)

The leveling bubble positioned near the leg hinges can

be used to ensure that the tripod is perfectly vertical. The

tripod is vertical when the bubble is located within the red

circle. To level of your tripod, it will be necessary to adjust

the individual leg sections.

Warranty

ARTOGRAPH tripods are warranted against all defects in

material and workmanship for one year from the date of

Fig. 11

sale to the original purchaser. Any part of the equipment

which becomes defective under normal installation and

use will be repaired or replaced by ARTOGRAPH without

charge for factory labor and materials', providing the

equipment is returned, shipping pre-paid, to our factory

within this period. CONTACT OUR OFFICE FOR RETURN

AUTHORIZATION. Equipment repaired or replaced under

warranty will be returned freight or postage prepaid. The

warranty for repaired or replacement parts shall be for the

duration of the original warranty. This warranty does not

apply to equipment which has been subjected to abuse,

accident, or alteration, nor to equipment which has been

improperly installed or wired in violation of the printed

instructions furnished.