Alula RE927RPA Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy Alula RE927RPA. Alula RE927RPA 4 stron. Gsm expansion card, connect+ encrypted
Drukuj stronę
Reset the Expansion Card
factory default switch until the expansion card's
LEDs flash once (roughly 5 seconds). This is
normally never required.
Factory default the Expansion Card
pressing the factory default switch until the
expansion card's LEDs flash twice (roughly 10
seconds). This is normally never required.
Cellular LED Indicators
state of the expansion card. The CS and Platform
LEDs are not used.
LED
Indication
ON and Flashing off once
Power
every second - Powered and
(Green)
running
Cellular
ON - Registered with the local
(Red)
cellular network
Signal Strength
signal bar LEDs.
Signal Bar Cellular Signal Strength
0
Bad (0 to 14)
1
Marginal (15 to 19)
2
Acceptable (20 to 24)
3
Good (25 to 30)
4
Best (30+)
Troubleshooting Cellular Expansion Card Problems:
• Ensure antenna connectors are securely snapped into the circuit board
• Reposition the panel (move or rotate)
• Move the panel higher in the building
• Move the panel away from metal objects (appliances, ducts)
• Move the panel closer to a window
by pressing the
are used to show the
can be determined using the
by
Factory Default Switch
Cellular LED Indicators
Signal Bar LEDs