Alula RE314 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Alarm dymowy Alula RE314. Alula RE314 13 stron. Smoke alarm dsc compatible

Drukuj stronę

Resolution Compatibles

Smoke Alarm

that alarms when it detects smoke or

temperatures above 135°F (57°C).

Features

• UL217 and ULC531 listings

• Smoke and heat detection

• 5 year warranty

Quick Start Guide

1. Remove the mounting plate.

2. Pull the battery tab.

3. Restore the mounting plate and

twist it fully onto the smoke alarm.

Note: Enrollment is possible only

if the mounting plate is twisted

onto the smoke alarm.

4. Enroll the smoke alarm by placing

the panel into wireless enrollment

mode and then holding down the

smoke's test button until the smoke

alarm beeps.

5. Remove the mounting plate and

refer to Sections 2 and 6 for

positioning and installation.

6. After mounting plate is installed

restore the smoke alarm onto the

mounting plate and fully test the

smoke alarm per Section 7.

To replace the battery,

smoke alarm from its mounting plate

and replace the batteries.

This manual should be read prior to use and retained for further information.

Verify proper enrollment and operation using your security panel's installation manual.

RE314 Smoke Alarm

DSC

is a fire-protection device

detach the

Compatible

™

12 inches

minimum

Attention

Pull Battery Tab

12 inches

minimum

Position Smoke Alarm

Test Smoke Alarm