Alula CAM-360-JS1 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera bezpieczeństwa Alula CAM-360-JS1. Alula CAM-360-JS1 4 stron. Indoor 360 camera

Don't have the app?

Scan the QR code for your device's app store here

Resetting the camera

a. Keep the camera power ON for one minute. Turn the camera and find the

reset hole, which is next to the MicroSD card slot

b. Insert a paper clip or pin in the reset hole. Press and hold the reset button for

five seconds, until the LED starts flashing

c. Wait for one minute until the LED indicator blinks in a three-flash repeating

pattern

Camera setting tips

a. In case you are mounting your camera on a wall, mount the camera around

6 feet from the ground to obtain better detection accuracy.

b. Mount the camera on a vibration-free surface

2.0M

Mounting instructions

a. Place the ceiling bracket on the mounting surface as a pattern to mark

the holes

b. Drill the mounting holes and anchors to secure the bracket to the wall

c. Fasten the camera to the bracket using the tapping screws

d. Hang the camera and plate onto the hanger screws

e. Arrange cable properly so that it will not block pan/tilt operation

Apple iOS

Android