DKT Comega High-power Fiber Amplifier Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz DKT Comega High-power Fiber Amplifier. DKT Comega High-power Fiber Amplifier 15 stron. High-power fiber amplifier network management interface
Drukuj stronę1.3 Network
Click 'Network' to go to Server setting window, in which parameters like IP Adress, Subnet,
Gateway etc can be set. Click 'Submit', new parameters are sent to the server. (see
Figure 4)
There are two configuration table columns displayed. One shows the current running
configuration, and the other shows the configuration that will take effect after the device
is rebooted.
The following items are required for the reboot to take effect:
DHCP Client On/Off
IP Address
Network Mask
DHCP Client ID
If the IP Address, Network Mask, Gateway, Hostname, and Domain have been configured
for the device and DHCP is turned on, the original configuration items are ignored.
DHCP will auto-discover and eclipse those configuration items.
Figure 4
Page 5 of 14