Aluprof DC 920 Podręcznik programowania - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Nadajnik Aluprof DC 920. Aluprof DC 920 4 stron.

6. SETTING OF THE AUTOMATIC CONTROL TIME

Switch to automatic or

random mode.

Pressing the "MODE" button will

switch to settings of the

lowering hour.

In the auto mode interval between lifting and lowering time cannot be less than 32 minutes, otherwise the display will

show "ER:01" error.

We reserve the right to any technical change.

Valid on 2022.04.04

PROGRAMMING MANUAL OF THE DC 920 TRANSMITTER

Press and hold "TIME"

button for 5 seconds. Lifting hour

digits will flash.

Use the "TIME" button to switch

between the hour and

minute settings.

Use the "TIME" button to switch

between the hour and

minute settings.

By pressing the "UP" or "DOWN"

buttons, settings of

the lowering hour and

minutes can by change.

By pressing the "UP" or "DOWN"

buttons, settings of the

lifting hour and minutes

can by change.

Press and hold "TIME" button for 5

seconds till flashing of the icons on LCD

will stop, which means that the changes

to the settings have been saved.