Aluprof DC920 Podręcznik programowania

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Nadajnik Aluprof DC920. Aluprof DC920 2 stron.

Drukuj stronę

Technical specifications:

- 5 channel

- Each channel can control maximum 20 receivers

- LCD display

- Dimensions : 125x50 mm

- Power supply: 3V (CR2430)

- Frequency: 433.92MHz

- Radiated power: 10 miliwat (mW)

- Operating temperature: ~ -10

- Average range: 200 meters (in open space)

35 meters (inside building)

Works with tubular motor's DM35R, DM45R, DM45RM, DM55RM, DM59RM,

DM35EV/Y, DM45EV/Y

Company reserves the tolerance of catalog data due the different conditions usage.

In the auto mode the interval between rollup and roll down time cannot be less than 32

minutes, otherwise the display will show „Er:01".

Changes in the rollup and roll down time, can be made only in auto and random mode.

In the auto mode you can disable one or more channels of action in auto mode by

placing the cursor on the channel and press "P2" button, which causes flickering

of the channel.

If the operation distance of the transmitter will drop you should replace the battery.

STOP

DOWN

In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012 on waste

electrical and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes, marked with crossed

out wheeled bin symbol. The users are obliged to transfer their used equipment to a designated collection point for proper processing.

The marking means, at the same time, that the equipment was put on the market after 13 August 2005. These legal obligations have been

introduced to reduce the amount of waste generated from waste electrical and electronic equipment and to ensure an appropriate level

of collection, recovery and recycling. The equipment does not contain any dangerous components, which would have any particularly

negative impact on the environment and human health.

DC920 PROGRAMMING MANUAL

433MHz

C ~ +55

K -

MODE

K +

TIME

Central Office, Production Plant: Bielsko – Biała

ul. Warszawska 153, 43-300 Bielsko Biała, Polska

tel. +48 33 81 95 300, fax. +48 33 82 28 512

230V/50Hz

HOUR

MANUAL

AUTO MODE

Production Plant:

ul. Gosławicka 3, 45-446 Opole, Polska

tel. +48 77 40 00 000, fax. +48 77 40 00 006

e-mail: [email protected]

MINUTE

DOWN

RANDOM