DL diode led Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt oświetleniowy DL diode led. DL diode led 2 stron. 12vdc; 24vdc

Drukuj stronę
CLICKTIGHT
®
SAFETY & WARNINGS
MAIN POWER MUST BE TURNED
OFF BEFORE INSTALLATION.
FOR BLAZE LED TAPE LIGHT
!
INCORRECT -
DO NOT ALLOW
CLICKTIGHT PRONGS TO TOUCH
LED CHIP CONTACTS WHEN LED
TAPE IS INSERTED.
SUPPLIED ACCESSORIES
Tape-To-Tape Kit: DI-CKTP-TTT-5
A. CLICKTIGHT PRO Tape-To-Tape Connector (5)
B. Tape Light Fastener (10) & Screws (20)
A.
B.
Tape-To-Wire Kit: DI-CKTP-TTW-10
A. CLICKTIGHT PRO Tape-To-Wire Connector (10)
B. Spade Connector - 22AWG - 18AWG (25)
C. Tape Light Fastener (10) & Screws (20)
D. Wire Fastener (10) & Nails (10)
A.
B.
TOOLS FOR INSTALL
• Small Phillips-head screwdriver
• Wire Stripper / Crimper
COMPATIBLE LED TAPE LIGHTS
CLICKTIGHT PRO is compatible with most Diode LED solid color
2-channel 12V and 24V tape lights. See product page for a full list.
PRO INSTALLATION GUIDE
CLICKTIGHT
®
®
PRO
DO NOT EXCEED CLASS 2 LIMIT
WHEN LOADING CLICKTIGHT.
12VDC
60W
24VDC
100W
!
CORRECT -
CUT TAPE LIGHT SO
FOUR CONTACT/SOLDER POINTS
REMAIN TO ALLOW FOR GAP
BETWEEN PRONGS AND LED.
D.
C.
• Scissors
• Hammer
INSTALLATION
1
PREPARE WIRE AND ATTACH SPADE CONNECTORS.
a. Determine wire gauge (22 - 18AWG). Strip wires.
5A
4.17A
b. Attach spade connectors with crimper tool.
2
ATTACH WIRE TO CLICKTIGHT
1 OF 2
DRY LOCATION
INSTALLATION GUIDE
3/8 in.
(10 mm)
24V
12V
DC
DC
Fit in crimper tool
notch. Squeeze to
secure wire.
IG121815-3.0